Problems Installing Twonkyvision 4.4.11 on Linkstation II (MIPS)

[w***@public.gmane.org]

I used Twonkyvision successfully on my Linkstation for several years. After having to rebuild my Linkstation following a drive failure I installed firefly rather than twonkyvision. I now have a need to run Twonky again.

I downloaded the NAS installer from Twonky's website (see Link below). It appears to install ok and I can see the twonkymedia processes running. However, I cannot open the web page or connect from my media player (BT Internet Radio). netstat -an shows that the LS is listening on port 9000.

http://www.twonkyforum.com/unsupported/4.4.11/twonkymedia-linkstation-v2-mipsel-4.4.11-20090108.zip

- Has anybody else og this working?
- Have I missed something?
- Does anybody have an older version of Twonky NAS installer? (I'm sorry I cannot remember which version of Twonky I had running before).

(Note, I have a key for Twonky).




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/LinkStation_General/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/LinkStation_General/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:LinkStation_General-digest-***@public.gmane.org
mailto:LinkStation_General-fullfeatured-***@public.gmane.org

<*> To unsubscribe from this group, send an email to:
LinkStation_General-unsubscribe-***@public.gmane.org

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[John Euinton]

Hi William,

I tried Twonky on my LS2 (Mips) and found it worked for several days but
then would stop responding. I saw the same - netstat showing that the
port was listening. I tried configuring Twonky to use a different port,
but it still stopped responding after a few minutes. My LS2 is running
OpenLink.

I have stopped usisng Twonky and no use the freeware MediaTomb. You can
get a staically linked binary, ie it runs as-is on the Linkstation - it
does not require any shared libraries, from:

http://mediatomb.cc/pages/download#static

The LS1 (PPC) file is
mediatomb-static-0.11.0-r1-linux-uclibc-ppce300c2.tar.gz and the one for
the LS2 (MIPS) is mediatomb-static-0.11.0-r2-linux-uclibc-mips2el.tar.gz.

Regards,
John

Post by w***@public.gmane.org
I used Twonkyvision successfully on my Linkstation for several years.
After having to rebuild my Linkstation following a drive failure I
installed firefly rather than twonkyvision. I now have a need to run
Twonky again.
I downloaded the NAS installer from Twonky's website (see Link below).
It appears to install ok and I can see the twonkymedia processes
running. However, I cannot open the web page or connect from my media
player (BT Internet Radio). netstat -an shows that the LS is listening
on port 9000.
http://www.twonkyforum.com/unsupported/4.4.11/twonkymedia-linkstation-v2-mipsel-4.4.11-20090108.zip
<http://www.twonkyforum.com/unsupported/4.4.11/twonkymedia-linkstation-v2-mipsel-4.4.11-20090108.zip>
- Has anybody else og this working?
- Have I missed something?
- Does anybody have an older version of Twonky NAS installer? (I'm
sorry I cannot remember which version of Twonky I had running before).
(Note, I have a key for Twonky).